Foamsulate OCX
Light Density
Foamsulate OCX is a two component, light density, one to one by volume spray applied polyurethane foam. To produce Foamsulate OCX requires the use of an “A” component (ISO) and a blended “B” component (RESIN), which contains ZERO ozone depleting blowing agents, catalysts, polyols and fire retarding materials. Foamsulate OCX is an insulation system designed for use in residential, commercial and industrial applications. Use in lieu of more traditional forms of insulating materials such as fiberglass, cellulose or other loose fill products.
Typical area’s where spray polyurethane foam is applied are:
EXTERIOR WALLS • VENTED ATTIC’S • UN-VENTED ATTIC ASSEMBLIES • BETWEEN FLOORS • CEILINGS
Typical Physical Properties
| Property | Foamsulate OCX | Test |
|---|---|---|
| R-VALUE | 3.7 @ 1" | ASTM C 518 |
| CORE DENSITY | 0.5 LB / Cubic Foot | ASTM D 1622 |
| OPEN CELL CONTENT | > 95% | ASTM D 6226 |
| SOUND TRANSMISSION COEFFECIENT | 50 | ASTM E 413 |
| AIR IMPERMEABLE | <0.02 (L/s-m2) @ 3.5" | ASTM E 283 |
| BUILDING CODE CERTIFICATIONS / FIRE TEST DATA | ||
|---|---|---|
| EVALUATION SERVICE REPORT | IAPMO | UES 620 |
| FLAME SPREAD | ASTM E84 | Class I < 0 |
| SMOKE DEVELOPMENT | ASTM E84 | Class I < 300 |
| NFPA 286 | Pass: Can be used without a 15-minute thermal barrier when covered with one of the approved intumescent coatings as shown on page 2 of the Technical Data Sheet. | |
| AC377 APPENDIX X | Pass: Complies with the applicable requirements of ICC-ES AC377 Appendix X for use in attics and crawlspaces without a prescriptive ignition barrier or intumescent coating. | |
| UL GREENGUARD GOLD | GOLD: UL 2818 - 2013 Standard for Chemical Emissions for Building Materials, Finishes and Furnishings | |