PremiCote 1400 TC

PremiCote 1400 is a plasticizer free 100% acrylic, single component, water-based, premium quality elastomeric coating for spray, brush, or roller application.

Recommended Uses:

This product is intended to be used as a universal roofing and wall coating. It has excellent adhesion to many substrates including polyurethane foam, concrete, masonry, primed metal and primed wood. When used with a suitable base coat it is an exceptional protective coating for most single ply roofing membranes. Contact Premium Spray Products for specific application information.

Product Limitations:

This acrylic coating is water based and must be stored and used to prevent from freezing at 32°F (0°C). Do not apply when inclement weather is imminent. Curing is necessary prior to precipitation to avoid washing off the coating or affecting adhesion or physical properties. Do not apply if temperature will drop below 50°F (10°C) within 1-2 hours. The acrylic coatings stop curing below 50°F. Do not apply when the relative humidity is in excess of 85%. Avoid applying late in the day when conditions for dew and condensation are imminent. Material is not intended for ponded water applications. Applications where there is a risk of vapor drive, such as cold storage and refrigerated tank applications should only be made in conjunction with a suitable vapor barrier. This material is not intended for use as a thermal barrier.

Ponding Water: 

Warranties do not cover damage due to ponding water. The National Roofing Contractors Association considers ponding water on any roof unacceptable. (See the NRCA Roofing and Waterproofing Manual). For additional assistance please contact the Premium Spray Products Technical Services dept. of Accella Polyurethane Systems™, LLC. at (770) 528-9556.

Typical Physical Properties

STANDARD COLORS / PACKAGING
PREMICOTE 1400 BC - BASE COAT
Base coat formulation is available. Provides excellent adhesion and recoatability
AVAILABLE COLORS
Gray, Ivory
PREMICOTE 1400 BC - TOP COAT AVAILABLE COLORS
White, Light Gray, Tan
PRODUCT PACKAGING AVAILABLE IN
5 Gallon Pails
55 Gallon Drums
Typical Physical Properties

PROPERTY PREMICOTE 1400 TEST
TENSILE STRENGTH 290 PSI + 25 ASTM D 2370
ELONGATION 235% + 25 ASTM D 2370
PERMS 17 ASTM D 1653
SOLIDS (BY VOLUME) 55% +/- 2 ASTM D 2697
SOLIDS (BY WEIGHT) 68% +/- 2 ASTM D 1644
DENSITY 12 lbs / Gallon ASTM D 1475
VOC < 50 grams/liter Method 24
FLASH POINT > 212°F ASTM D 1310
LOW TEMP FLEX Passes 180° Flex over ½ Mandrel @ -15°F ASTM D 522
CURE TIME 24 Hrs. depending upon temperature & humidity
DRY TIME/RECOAT TIME 2-5 Hrs. at 75° F & 50% RH
SURFACE BURNING Flame Spread: 15 - Smoke Development: 15 ASTM E-84
SHELF LIFE 12 months in sealed containers ASTM C 1549
SOLAR REFLECTIVITY 0.88 ASTM C 1371
EMISSIVITY 0.90 ASTM C 1980
SRI 111 ASTM D 624
TEMPERATURE LIMIT 0°F to 185°F
UL LISTING This product has achieved a UL Class A rating over a UL noncombustible deck and a Class B rating over a combustible deck when tested in accordance with UL 790.
ASTM D 6083 Passes requirements of ASTM D 6083 Standard for Acrylic Coatings