PremiCote™ 2100
PremiCote™ 2100
PremiCote™ 2100 is a ready-to use, high solids, single component, moisture cure fluid applied silicone coating.
General Properties:
Breathable membrane possessing superior weathering and water resistance characteristics.
Recommended Uses:
Provides elemental protection for architectural surfaces such as vertical walls, masonry, concrete, metal, single ply roof membranes and sprayed-in-place urethane foam systems.
Product Limitations:
Not recommended for continuous immersion service, for use in cryogenic tank, or cold storage roofing applications without a vapor barrier, or directly over modified bitumen, asphalt or coal tar built-up roofing systems without a sealer.
Flammability Characteristics:
PremiCote™ 2100 Silicone Coatings carries Class “A” Non-Combustible and Class “B” Combustible credentials as tested under UL 790 procedures over spray foam and single ply roofing systems. Contact Accella™ Polyurethane Systems or refer to the UL directory for specific information.
Compliance:
Material tested complies with all the requirements of ASTM D 6694-01 Standard Specification Liquid-Applied Silicone Coating used in Spray Polyurethane Foam Roofing.
| STANDARD COLORS / PACKAGING | ||
|---|---|---|
| PREMICOTE™ 2100 | AVAILABLE COLORS White, Light Grey, Dark Grey & Tan (Special colors are available upon request at additional charge. Allow additional 15 days for nonstandard colors) |
|
| PRODUCT PACKAGING | AVAILABLE IN 5 Gallon Pails (19 liters) 50 Gallon in Drums (189.3 liters) |
|
| Typical Physical Properties | ||
|---|---|---|
| TENSILE STRENGTH | 307 psi at 73°F. ± 20 484 psi at 0 °F. ± 20 |
ASTM D-2370 |
| ELONGATION | 205% at 73°F. ± 20 306% at 0°F. ± 20 |
ASTM D-2370 |
| TEAR RESISTANCE | (Die C) 26 lb f/in @ 73°F | ASTM D-624 |
| VISCOSITY: (BROOKFIELD RVF) | Typical 4,500 to 6,500 cps | #5 Spindle 20 rpm @ 77°F |
| REFLECTIVITY (WHITE) | .70 Aged 3 yr | ASTM C-1549 |
| EMISSIVITY (WHITE) | .90 Aged 3 yr | ASTM C-1371 |
| SRI VALUE | 110 Initial | - |
| PERMEANCE: US PERMS | 9.3 ± | ASTM E-96 Procedure B |
| TENSILE, SET AT 100% ELONGATION: | Nil. | - |
| TEMPERATURE STABILITY RANGE: | -80 °F. to 350°F. (-37C. to 177C) | - |
| WATER ABSORPTION: | 0.1 weight % after 2 weeks at 75°F. (24°C) | ASTM D-471 |
| WEATHERING/UV RESISTANCE: | No degradation after 5,000 hours | ASTM D-6694 |
| TACK FREE TIME: | 1 Hour< 50 Grams/Liter | Temp. & Humidity Dependent |
| VOC: | <50 Grams/Liter | EPA Method 24 |
| DUROMETER HARDNESS: | 50± 5 points | ASTM D-2240 Shore A |
| SOLIDS CONTENT BY WEIGHT: | 96% ± 2 | ASTM D-1644 |
| SOLIDS CONTENT BY VOLUME: | 96% ± 2 | ASTM D-2697 |
| MAXIMUM CONTINUOUS SERVICE TEMP.: | 185°F (85°C) | - |
| FLASH POINT: | > 290°F. | ASTM D-92 |
| CURE TIME: | Minimum 2 hrs / Maximum 8 hrs | @100°F & 90% Humidity @ 40°F & 20% Humidity |
| SHELF LIFE: | (UNOPENED CONTAINERS): 12 months (When Stored Between 40°F. and 80°F) | |